Switch>en
Switch#sh ver
Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software 
(CAT3K_CAA-UNIVERSALK9-M), Version 03.06.07E RELEASE SOFTWARE (fc3)
Technical Support: https://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Wed 12-Jul-17 16:55 by prod_rel_team

Cisco IOS-XE software, Copyright (c) 2005-2015 by cisco Systems, Inc.
All rights reserved.  Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0.  The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.
(https://www.gnu.org/licenses/gpl-2.0.html) For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE software.

ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 3.56, RELEASE SOFTWARE (P)

Switch uptime is 1 minute
Uptime for this control processor is 4 minutes
System returned to ROM by reload
System image file is "flash:packages.conf"
Last reload reason: Reload command

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
https://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

License Level: Lanbase
License Type: Permanent
Next reload license Level: Lanbase

cisco WS-C3650-48PD (MIPS) processor with 4194304K bytes of physical memory.
Processor board ID FDO2144****
1 Virtual Ethernet interface
50 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
252000K bytes of Crash Files at crashinfo:.
1611414K bytes of Flash at flash:.
0K bytes of Dummy USB Flash at usbflash0:.
0K bytes of  at webui:.

Base Ethernet MAC Address          : 00:5d:73:d1:**:**
Motherboard Assembly Number        : 73-15897-06
Motherboard Serial Number          : FDO2144****
Model Revision Number              : S0
Motherboard Revision Number        : A0
Model Number                       : WS-C3650-48PD
System Serial Number               : FDO2144****

Switch Ports Model              SW Version        SW Image              Mode
------ ----- -----              ----------        ----------            ----
*    2 52    WS-C3650-48PD      03.06.07E         cat3k_caa-universalk9 INSTALL

Configuration register is 0x102

Switch#sh env all
Switch 2 FAN 1 is OK
Switch 2 FAN 2 is OK
Switch 2 FAN 3 is OK
FAN PS-1 is OK
FAN PS-2 is OK
Switch 2: SYSTEM TEMPERATURE is OK
SW  PID                 Serial#     Status           Sys Pwr  PoE Pwr  Watts
--  ------------------  ----------  ---------------  -------  -------  -----
2A  PWR-C2-640WAC       LIT2131****  OK              Good     Good     640
2B  PWR-C2-640WAC       DCB2139****  OK              Good     Good     640

Switch#
Switch#sh inv
NAME: "c36xx Stack", DESCR: "c36xx Stack"
PID: WS-C3650-48PD     , VID: V05  , SN: FDO2144****

NAME: "Switch 2", DESCR: "WS-C3650-48PD-L"
PID: WS-C3650-48PD-L   , VID: V05  , SN: FDO2144****

NAME: "Switch 2 - Power Supply A", DESCR: "Switch 2 - Power Supply A"
PID: PWR-C2-640WAC     , VID: V03  , SN: LIT213****

NAME: "Switch 2 - Power Supply B", DESCR: "Switch 2 - Power Supply B"
PID: PWR-C2-640WAC     , VID: V03  , SN: DCB2139****

Switch#